Hello @Stampertje ,
Credit for this article goes to @mldowling of Rising Connection , Australia
Peplink have hidden several of the menus until you add in equipment that is capable of the menu’s features. Pre-configuring of these can help tremendously with doing large project roll outs. The Hiding of the menus has been done to help simplify the on boarding process for new people and their devices.
For those that need to do more advanced pre-deployment work, all of the features are available, though you need to d…
https://forum.peplink.com/t/incontrol-2-initial-setup-guide/8483?u=mldowling
As of Firmware 6.3, users can assign a specific VLAN to a LAN Port. Here are the steps to use this feature:
NB: Not all models support per-port VLAN support. See our full model comparison for details.
UPDATE: Per-port VLAN support added for a number of models in firmware 7.1.0:
Balance: 305, 380, 580,710, 1350, 2500
MAX: BR1 ENT
MediaFast: 500, 750
UPDATE 2: Per-port VLAN support has also been added to the MAX Transit en BR1 MK2 in firmware 7.0:
Introduction
This article describes step-by-step how to configure Captive Portal in InControl2.
With captive portals you can easily offer internet to your guests and easily control connection time and speed, data usage limits, and more.
By creating captive portals in InControl2 , you can apply the same configuration to all, or a selection of your Peplink Access Points in just a few clicks.
Sign in to InControl2
Select your Wi-Fi AP settings and click on the “Add new SSID” button
[CPiIC2]
A sc…
Requirements:
To set up a Social Wi-Fi Hotspot, you will need the following items:
An InControl 2 account.
Your respective social media pages, where applies. We support Facebook, Google ID, Twitter, LinkedIn, Sina Weibo,as well email authentication, Guest Accounts, Token Access and also SMS authentication.
A supported device that is under warranty, running Firmware 6.2.2 or above or AP Firmware 3.5.2 and above.
Supported devices:
Peplink devices that have built-in Wi-Fi AP capability can de…
NOTE: Remember to turn OFF the internal AP controller within you MAX HD2 router.
If you have more questions, please ask the community here in the forum.
