Captive portal on just one SSID possible?

[mldowling]

Hello @psychobunny,
There is a good guide on setting up the captive portal via InContro2 here.

Configure Captive Portal in InControl2

Introduction This article describes step-by-step how to configure Captive Portal in InControl2. With captive portals you can easily offer internet to your guests and easily control connection time and speed, data usage limits, and more. By creating captive portals in InControl2 , you can apply the same configuration to all, or a selection of your Peplink Access Points in just a few clicks. Sign in to InControl2 Select your Wi-Fi AP settings and click on the “Add new SSID” button [CPiIC2] A sc…

The sequence we find works best is:

1. Setup your InControl2 profile/organisation
   (see guide here InControl 2 Initial Setup Guide)
2. Create your TAGs on your devices
   (see discussion here Ssid only on one AP - #3 by mldowling)
3. Create your Captive Portal(s)
   (as per above Configure Captive Portal in InControl2)
4. Create your VLAN(s)
   (see Tips & Tricks here Guide to setting up VLANs for Printing with Firewall isolation)
5. Create your SSID(s)

Once you have that setup, then you should be good to go with the Captive Portal running on a separate VLAN.
Happy to Help,
Marcus