Surf SOHO MK3 --> 802.11w ? WPA3?

Product Discussion Pepwave AP & Surf
1

What is the timeline on 802.11w? WPA3? Sorry in advance I know you guys are busy!

Thanks!

2

@happysurfer

Please stay tuned for the good news :+1: :+1: :+1: :+1:

3

Um… Still “staying tuned”…

Now for 8 months.

Please update wpa3 release.

4

Umm … Would this be helpful? https://download.peplink.com/resources/firmware-8.1.0-release-notes.pdf. In particular, see reference 22279. Or this? AP One Firmware 3.6.2 / 3.7.3 / 3.8.1 Now in GA .

5

Thank you for quick reply.

I have upgraded to 8.1.0…

No WPA3 option in any of my current or new WLAN setup pages?

Was the first thing I looked for after the FW upgrade.

Please advise

7

@Citizen

This is what i saw for my SOHO MK3 device firmware 8,1.0 for the original request for this thread.

image
image1192×814 70.2 KB

image

1 Like
8

Surf SOHO MK3 running 8.1.0.

I will attempt to upload the FW again…

9

@Citizen,

If you have problem to upgrade the SOHO MK3 device, please refer to the forum post below for the firmware that will fix the issue .

10

Thank you for your help.

I think I’ve got it figured out. Had something to do with my config. If I factory reset the SOHO and then apply the FW upgrade… the wpa3 shows up fine. Then upload saved conf file.

Thanks to all!!!

1 Like