Hi!
I have 2 projects where the location has poor cell reception.
To boost the signal, I am using the Wilson Pro 70 Plus.
Can I connect the MAX BR1 directly to the amplifier using a splitter?
I believe the signal is 50Ohm.
Thanks, in advance!
David
David,
Because of the high output power of repeating amplifiers like the Pro 70, you wouldn’t want to direct connect that to a BR1 as it may damage the modem. You would use an internal panel or dome antenna and place the BR1 within range of that repeated signal, or use a direct connect amplifier like the Signal 4G.
Suggest you read this: Extreme range BR1
Except use one of these: Power Divider, RF Splitter Combiner - INSTOCK Wireless