Remote User Access Settings For FusionHub

[TK_Liew]

@Venn, please refer to the knowledgebase below.

Configure Remote User Access using OpenVPN

[image] Available from firmware version 8.0 Introduction Besides being able to use PPTP and L2TP with IPsec you can now also use OpenVPN for Remote User Access to your LAN. This article describes how to configure your Peplink router and a Windows 10 client for remote User Access using OpenVPN. Configuring your Peplink router Log on to the web admin interface of the Peplink router. On Balance models, navigate to Network > Remote User Access. On MAX models, navigate to Advanced > Remote U…

I have no problem to establish the OpenVPN with FusionHub (1 WAN only).

Question:

1. Have you put the OpenVPN client profile (.ovpn) into the correct file path as per knowledgebase?

2. Have you enable the DHCP Server at Network > SpeedFusion > DHCP Server For NAT Mode Profile?