Remote Speed Test

[Steve]

I think this WAN Analysis tool can help. You can use your hub site Balance as server or setup a FusionHub Solo on the cloud.

WAN Analysis - WAN to WAN Speed Test

WAN Analysis was added in firmware 8.0.0. The feature will allow you to run a WAN to WAN speed test from Peplink to Peplink. You’ll have the option of setting a device up as a Server or a Client. One device must be set up as a server to run the speed tests and the server must have a public IP address. This is done from the UI under the WAN Analysis tab. [image] The default port is 6000 and can be changed if required. The IP address of the WAN interface will be shown in the WAN Connection Stat…