IGMP Configuration for multicast traffic

Everything Else
1

Dear team, I need support to configure IGMP. We have 1 SD Switch(24 port) and 4 (8port sd switch) in our network, two other brand unmanaged switches also on the same network.
6 Crestron NVX devices are installed on the network for transmitting/receiving Audio and Video on the network.
As shown in diagram devices are connected.

Multicast Network Setup
Multicast Network Setup1000×839 10.7 KB

IGMP in all 5 peplink switches is enabled.
But we can receive multicast data only if Tx and Rx on same switch.
In our setup we have Some Tx/Rx on three different peplink switches so not able to receive multicast data on all devices.

I think this is due to of Misconfiguration of IGMP.
Let me guide how to configure in right way.

Thanks
Neeraj

1 Like
2

did you ever get this solved?
I don’t see much on peplink’s IGMP abilities and this speaks to a similar use case I have coming up

3

Hi,

Should be available.
Here is a topic about it: SD-Switch: VLAN / IGMP Snooping configuration

Hope this helps.