AT! Command for Sierra modem in PepWave Max BR1

[TwilioCell]

I did just find this link also!

Cellular Firmware Upgrade Process

To upgrade the firmware on the cellular module you will need to navigate to the support.cgi page. This can be done by making a change to the address in the address bar. If you are accessing your device via IC2 from the Remote Web Admin feature, you’ll see something like this: .ic.peplink.com/ra/remote/<SERIAL_NUMBER>/cgi-bin/MANGA/index.cgi The change will be at the very end, the index.cgi, this will need to be changed to support.cgi. It should look like this: .ic.peplink.com/ra/remote/<SERIA…