[Webinar] Peplink University - Get InTouch with Your Devices, Anytime, Anywhere
Your devices are everywhere. InTouch puts them all within reach.
Cameras in every store. IoT equipment on the factory floor. Switches at client sites. The devices you manage rarely sit next to you. Reaching them usually means one of two things: opening ports on every router, or building a separate Out-of-Band Management (OOBM) network just for admin access.
Peplink InTouch gives you a better way without the extra network. It’s built into InControl, so one login lets you view, configure, and troubleshoot the IP cameras, switches, servers, and remote desktops behind your Peplink routers. No public IPs. No port forwarding. No VPN to set up.
Join Professor P. live on Tuesday, October 13, 2026, at 11 AM CDT to see how it works.
Inside This Session:
- OOBM Made Simple: See how InTouch delivers OOBM through InControl, with no second network to build.
- InTouch vs. Port Forwarding: See the differences in security, setup, and scale, and when to use each.
- Real-World Applications: Explore use cases like managing cameras across retail sites, reaching industrial IoT equipment, supporting remote clinics, and administering client switches as an MSP.
- Live Demo & Q&A: Watch InTouch in action and get your questions answered live.
Already on InControl and SpeedFusion Connect? InTouch is already in your toolkit, and this session shows you how to put it to work.
US region / EMEA region
- Live webinar
- Tuesday, October 13, 2026
- 11 AM Central Daylight Time | 6 PM Central European Summer Time
- View in your time zone
- The live session will be recorded. Register now to receive the recording and the slides a few days after the webinar.
Register now
If you have any questions for us to answer during the webinar, feel free to send them to [email protected]