VPN Over Satellite

[SamuelNorris]

Try doing a PepVPN test over the VPN

Do the first test (upload and then download) in TCP mode. You will probably find this maxing out at around 2Mbps.

Then do a test (upload and then download) in UDP. In this mode, you have to specify how much data it will force down the tunnel. You will probably find that you can push close to the expected bandwidth down the link when running the UDP test.

This is the drawbacks of using a VPN of satellite, the “TCP Spoofing” that is been done by you satellite modem is been bypassed by the VPN.

There are a few articles on this forum about it;

Peplink with multiple L2 satellite connection

Hi. We are looking a solution for satellite communication using multiple sat operator. The satellite modem is trunking modem that works in Layer2. We are trying to combine the bandwidth so we can get full capacity. The Latency around 600ms - 800ms. [image] The main problem is our client only ask for L2 connection to their router, with load balance, fail over and jumbo frame mtu. Can you help with this. If at some point we need to add other router between the customer router, we can pr…

Have a read of @MartinLangmaid’s article on this topic too
https://www.slingshot6.com/blog/how-to-reduce-vpn-latency-over-satellite-links/

Hope this helps