VLAN WAN Health Check failure with Outbound policy change

Product Discussion Pepwave MAX
1

Tangential follow-up to this issue with the 8.3.0b(X) releases.

Any time an Outbound policy change is applied, the VLAN WAN Health Check will fail, resulting in a disconnect on that VLAN connection. This failure occurs independent of changing the policy to include or exclude that VLAN WAN in the Outbound policy. The resolution is to move that VLAN WAN to ‘Disabled’, wait a few seconds, then re-add that VLAN WAN to a ‘Priority x’.

This issue is repeatable on a Pepwave MAX BR1 Pro 5G running 8.3.0RC2.

Has anyone else encountered this issue, or engineering confirm the same behavior?

TIA.

2

@Lee_Zim , Thank you for the details information shared. Let me try to reproduce this.

4

@Lee_Zim ,

Tried hard to reproduce the issue using my test lab BR1 Pro 5G device and we have no luck to see the problem.

image.png
image.png998×868 44.3 KB

image.png
image.png807×299 21.8 KB

Possible for you to share us a config file for your device ? We would like to reproduce the issue using the same setup.

5

@sitloongs Thank you for testing internally. I will send screen captures and a config file through the support ticket. (Curious to find out how/what is different in my setup).

1 Like