Upgrade to the latest firmware since a old version

mmontiel · February 12, 2015, 3:55am

Hi,

I need Upgrade my Pelink Balance 30 to the last firmware version.

Model: Peplink Balance 30
Firmware: v4.8.1 build 1106

Can I upgrade directly to Firmware 6.x?

Thank you.

Jarid_Petermann · February 12, 2015, 5:38am

Hello,

Provided that the device is under warranty. You will need to upgrade in the following order

ciccio1976 · December 5, 2015, 9:21pm

Hi,

Good morning, I also find myself in the same situation I have:

Model: Peplink Balance 30
Firmware: v4.8.1 build 1106
when I try to do the firmware upgrade, the system tells me that I have to save the configuration, then a screen “can not display the page.”
and “nothing happens” …
It is not that there is another version between 4.8.1 and 5.2.2 build 1106?
Thank you

sitloongs · December 6, 2015, 2:48pm

Hi,

Possible to share us the B30 hardware version ?

For more information, please refer to the URL below:
http://www.peplink.com/knowledgebase/determine-serial-number-firmware-version-and-modem-support-version-of-peplink-balance-device/

Else if the above can’t help you to get the hardware version, please provide the screenshots for the device info page for us to further check on it.

Thank You

ciccio1976 · December 6, 2015, 4:42pm

Thanks for the reply.
attached screenshot

ystem Information
Router Name Balance_8CDC
Model Peplink Balance 30
Serial Number 1824-4A13-8CDC
Firmware v4.8.1 build 1106
Uptime 0 day 20 hours 15 minutes
System Time Mon Dec 07 09:42:04 CET 2015

TK_Liew · December 7, 2015, 10:23am

Hi,

v4.8.1 is the latest supported firmware version for your Balance 30 since the hardware was End Of Life. You may look for local Peplink partner to refresh your hardware.

Thank you.