update routes

Product Discussion Peplink Balance
1

I have two spokes tunneled via FH. on both spokes, the Native VLANs have same IP, subnet address, and the tunnels got stuck on " updating routes"
spoke 1: Native vlan: 192.168.100.0/24
spoke 2: Native vlan 192.168.100.0/24

any idea?

2

If you are in layer 3 you can’t have remote devices with the same Subnets. You’ll need to change the subnets so they are different or use virtual network mapping so the FusionHub sees them as different subnets (but the actual remote device based IP ranges stay the same).