Surf Soho PepVPN


#1

I have been trying to connect 2 Surf Soho with dyndns and PepVPN.
I get this message from the event log: Speedfusion: Making VPN connection with an End Point (XXXX-XXXX-XXXX) is not allowed.
Does this mean that I need an other Peplink device in one of the ends to make a PepVPN connection?
If so, what devices is suitable for home use? I am trying to link several amateur radio stations to one point, I do not need high troughput, but need the ability to have dynamic DNS in both ends.


#2

Please upgrade to the newest firmware and try again.


#3

Both units have 6.0.3
I have not found a newer firmware


#4

Hi Magnus, the Surf SOHO was originally designed to be a PepVPN endpoint device only and therefor not able to terminate the tunnel directly.

After receiving feedback from our customers and resellers, we have decided to remove this restriction and allow a PepVPN connection between all PepVPN enabled devices. This will be forthcoming in the 6.1.0 firmware release, due out soon.

Please note though that these devices will always have a limit of 2 PepVPN peers, so if you have 3 or more remote devices needing to be established then you would want to look at a Peplink Balance 380 or higher.


#5

Thank you. I will eagerly wait for the new firmware.
Will it be possible to use a Balance 305 for PepVPN? And if it is possible, how many tunnels will it support?


#6

The Balance 305 will probably support PepVPN with the same 2 device limit, if you need more devices you would want to unlock SpeedFusion or just buy a 380 to start with.


#7

2 PepVPN for 305 will be great!!!

Sometimes I need to log into some Balance that are behind a firewall without any public ip to provide support and the 305 give me so much headaches…

AG


#8

I tried the 6.1.0-b17 beta firmware, and I’m not seeing the PepVPN feature. Can you comment as to the availability of this feature?


#9

Hi Jeremyrnelson,

If you referencing the SOHO, the PepVPN option is under Advanced > PepVPN. Now if this is the initial setup, you will need to assign a local ID for the SOHO before being able to build the profile. Once you save the ID, the profile screen should appear allowing for setup.

I hope that helps, let me know if I’m misunderstanding anything at all.


#10

Yes, that did it, thanks! I didn’t realize I had to save the local ID before the rest of the profile would appear.


#11

Hi Jeremyrnelson,

Now if this is for the B305, go ahead and update to 6.1.0 b18 and the option should be there just like the SOHO.


#12

I have upgraded both Surf Soho’s, and PepVPN works now:)
Thanks


#13

moda christian louboutin outlet
moda christian louboutin outlet
<a href=“http://www.christianlouboutin-heels.org/it/”>moda christian louboutin outlet</a>

christian louboutin outlet store
christian louboutin outlet store
<strong><a href=“http://www.christianlouboutin-heels.org/it/”>moda christian louboutin outlet</a></strong><br>
<strong><a href=“http://it.christianlouboutin-heels.org/”>moda christian louboutin outlet</a></strong><br>
<strong><a href=“http://www.christianlouboutin-heels.org/it/”>moda christian louboutin outlet</a></strong><br>
<br>
<strong><a href=“http://www.christianlouboutin-heels.org/it/”>moda christian louboutin outlet</a></strong><br>
<strong><a href=“http://it.christianlouboutin-heels.org/”>moda christian louboutin outlet</a></strong><br>
<strong><a href=“http://www.christianlouboutin-heels.org/it/”>moda christian louboutin outlet</a></strong><br>
<br>
<strong><a href=“http://it.christianlouboutin-heels.org/”>christian louboutin outlet store</a></strong><br>
<strong><a href=“http://www.christianlouboutin-heels.org/it/”>christian louboutin outlet store</a></strong><br>
<br><br><a href=“http://bestreplicawatchessite392.webs.com”> outlet blog </a><br><br><a href=“http://cheaptimberlandboots36.webs.com”> outlet </a><br><br><a href=“http://nikeoutletonline801.webs.com”> About blog </a>