You’ll have double NAT anyway due to starlinks use of carrier NAT, this would likely be triple NAT but it should in theory still work.
2 Likes
Working for me! 
1 Like
Amazing! I am a Starlink beta user. Downloading and installing the test fw now and will report back.
On a Balance One Core, I’m not seeing the ‘Management IP Address’ field despite being on the latest fw.
I also reloaded the admin portal in private browsing to make sure it wasn’t a caching problem or anything.
Update: my router just rebooted again and seemed to revert to the prior FW? Trying the process again now.
New router version seems to be staying now on the 2nd try, however, the Management IP Address field is still MIA.
You need to click on the ? next to the hostname field to enable it.
4 Likes
Ahh thanks! My confusion was that the field already existed in the demo screenshots above.
Working great now 
1 Like
Awesome! I have a starlink dish myself and it’s been great so far.
2 Likes
Do I have incorrect settings? I’ve updated to the special firmware and enabled the “Management IP Address” and used 192.168.100.1 and tried both 255.255.255.0 (/24) and 255.255.255.255 (/32) - I am getting a “404 Not Found” at url https://192.168.100.1/cgi-bin/MANGA/index.cgi?mode=config&option=waninfo on my browser.
Starlink Android App running on same network also not working.
Thanks in advance
Use any address but 192.168.100.1
2 Likes
Ok thanks - I used 192.168.100.2 and 255.255.255.0 (/24). Going to 192.168.100.1 or 192.168.100.2 gives me 404. I assume I have to include some other settings someplace to forward 192.168.100.1 to 192.168.100.2 or vice versa??
If you’re using a multiwan scenario you may need to set the outbound policy to enforce - starlink wan - 192.168.100.1 dest
3 Likes
Thanks - I am using multiwan - tried that outbound policy and a few others without any luck.
If you want to open a support ticket and post the ticket # I can take a look quick. Make sure you include your S/N in the ticket.
1 Like
Strange - I removed the outbound policy. Settings under “Management IP Address” I have 192.168.100.2 and 255.255.255.0 (/24). Went to 192.168.100.1 in my browser and presto I get the Starlink page. If I go to the IP I set as the Management IP - 192.168.100.2, I get the 404 error? Going to 192.168.100.1 on a device that always uses the Starlink WAN is producing the Starlink page.
@WeiMing thanks for this revision ! It helped me connect to the management GUI of a non-Starlink LTE-modem in DHCP mode. Is there any chance of enabling this feature for Static IP mode as well? I have a DSL modem with static IP and would love to be able to access its management GUI as well. Thanks again!
Hope this is the proper forum. I have the PEPWAVE Surf SOHO MK3. I also now have Starlink Beta. How can I replace the Starlink router with the Surf? Seems the new firmware has not been released for the Surf. FOUND the link by using a google search. The search within the forum did not bring up the firmware info.
Thanks!
It’s in 8.1.2 beta
1 Like