Speedfusion traffic


#1

Hello,

please let me help with the following scenario, for example if there would be used Speedfusion on both WAN1&WAN2 ports:

http://www.peplink.com/knowledgebase/having-multiple-subnets-behind-a-router-on-the-lan/

  1. is it possible to allow only subnets 192.168.2.x and 192.168.3.x to pass through the speedfusion VPN tunnel?

  2. is it possible to “force” speedfusion tunnel traffic so that subnet 192.168.2.x would use “better/expensive” WAN link (WAN1) and 192.168.3.x would use “cheaper” WAN link (WAN2)?

Best regards,

Gregor


#2

Hi Gregor,

This is possible with the workaround of LAN advertising. Please find the screenshot below.


This is on our roadmap. Target to support this in v6.4.0. Stay tuned.