Specification Clarification request on MAX BR1 IP55 & MAX BR2 IP55 models

Product Discussion Pepwave AP & Surf
1

Hello Peplink team,
Specification check please on MAX BR1 IP55 & MAX BR2 IP55 models (picked up by our graphics team member, Taral):

On the website at https://www.peplink.com/products/max-cellular-router/outdoor it states that the MAX BR1 IP55 & MAX BR2 IP55 have no “RF Port Lightning Immunity: ITU-T K.20 (+/- 1.5 kV)”, yet on the PDF at http://download.peplink.com/resources/pepwave_max_br_ip55_datasheet.pdf it says they do, which is correct, the website or the PDF please.

Also there is a conflict with the dimensions on both the website and the PDF.
In the PDF, the image shows 300mm height
(image from PDF)

Yet on the website and the PDF the ext shows 147mm height
(text from PDF)

(text from website)

Please verify for us what are the correct Lightening specifications and dimensions.
Appreciate your assistance,
Marcus :slight_smile:

1 Like
2

Hi Marcus, thanks for pointing it out. Specsheets are updated now.

1 Like
3

Thanks @Dan,
There is still a difference between the specification sheet and the website with the “RF Port Lightning Immunity: ITU-T K.20 (+/- 1.5 kV)”, website says the units do not have it, Specification sheet say they do have it, which is correct ?
The fix on the dimension looks good.
Appreciate your assistance,
Marcus :slight_smile:

1 Like