SDX LACP can't select Port Interface

[bit.gao]

Hi Support,

I deployed LACP but select port show the " Link Aggregation is not supported by the selected port(s)" , what is mean ?

Regard ,
Bit.

[sitloongs]

@bit.gao ,

For SDX , you can only enable LACP for the below ports :

1. 2 x Ethernet WAN (WAN as LAN ports)

2. Expansion Module with 8x GE PoE ports
   EXM-8C (As LAN ports)

3. 2 x 10G SFP+ (As LAN ports)

4. Expansion Module with 4 x Fiber
   EXM-4F (As LAN ports)

[bit.gao]

Hi Sir,

About 1 & 3 , that what mean ?

Regard,
Bit.

[sitloongs]

@bit.gao

LACP only can be configure when the ports are configure as LAN ports.

Example :

1. Configure the 2 x Ethernet WAN as LAN ports

2. Enable LACP for the ports