Route all trafic in SpeedFusion tunnel not working with IPSec flows

Product Discussion Peplink Balance
1

Hi guys,

We have a Speedfusion tunnel between a Pepwave router and a FusionHub in cloud. Everything is working fine. We have a device behind the Pepwave router that have to establish an IPSec tunnel with a remote device. We are trying to use FusionHub to have public IP address at good price.

The problem is that, the IPSec traffic from the device behind the Pepwave router is not forward in the Speedfusion tunnel, it’s send to WAN port. All others flows are correctly forwarded (we use enforced algorithm).

Do you have some advice to manage this ?

Thanks,
Rudy

2

IPsec NAT-T needs to be disabled under: Network> Misc. Settings> Service Passthrough Support to control IPSEC traffic with outbound policy rules. It is enabled by default to prevent problems out the box for client VPN users when a multi WAN router is introduced essentially keeping IPsec traffic on a single WAN.

1 Like
3

Hi @MartinLangmaid

Thanks for your answer.

Rudy

1 Like