Remote User Access Settings For FusionHub

[Travis]

I would suggest switching from PPTP to L2TP - it is more secure, and should not be blocked by Azure. You would still need to open the proper ports/protocols in the Azure firewall, port forward those from FusionHub to your balance’s LAN IP (inside the tunnel), and configure the proper authentication settings on your balance.

This article should help you find the right ports and settings needed to achieve the setup in Kenny’s previous guide.

Setting up L2TP With IPsec

Setting up Your Peplink Device On Balance models, navigate to Network > Remote User Access. On MAX models, navigate to Advanced > Remote User Access. The following menu will appear: [image] Click Enable, and the menu will expand. [image] Enter your preshared key in the Preshared Key text area. In the Listen on section, select the WAN ports that you want the L2TP server to pay attention to. Be sure that at least one of the WAN ports have a public IP address. Under the User Accounts secti…