Public IP allocation on Max BR Pro

[sitloongs]

Hi Andy ,

Are you referring to Ethernet WAN how to Port forward/NAT mapping the Public IP service to the MX device ?

If yes, you can refer to the forum knowledgebase below :
Port Forwarding :

How to Configure Inbound Port Forwarding

Default WebAdmin port for the Balance One Core is running as using port 80. If your require to port forward the port 80, make sure you change the WebAdmin interface port. [image]

NAT Mapping

How to Configure One-to-One NAT Mappings

NAT Mappings also known as 1-to-1 NAT allows internal hosts, such as web server and mail server etc., behind Peplink Balance to communicate to the Internet via all protocols. With 1-to-1 NAT, you can: For inbound traffic, forwarding all TCP/UDP/IP protocols to the host behind the Peplink units. For outbound traffic, you can specify a Public IP address which you defined as "Additional Public IP" via WAN Settings as the source IP address. The followings are two scenarios of configuring 1-to-1…