Probleme configuration Pepwave Max BR1 SLIM

Product Discussion Pepwave MAX
1

Hi guys,

I try to configure the BR1 to connect a camera but cannot access ethernet wan port from local see diagram below.

image
image1457×697 150 KB

From the laptop you cannot acces webadmin and offcourse the camera behind it.
Is there a tutorial how to configure such setup ?

Regards.

1 Like
2

Hi @Techfree,

Have you configured the Security of the BR1 Slim so that perhaps it isn’t available via WAN, or on a specific port? See below:-

image

You may need to browse to https://192.168.1.3 to access the BR1.

You may also need to create a route on the Modem b-box2 so that traffic routed to the 192.168.50.0/24 network is routed via 192.168.1.3 before you’ll be able to see the camera.

Steve

2 Likes
3

Do a screen capture of your port forwarding settings on the BR1 please for review.
Also try translating a non standard port ie 192.168.1.3:8080 to 192.168.50.10:80 and see if that works.

1 Like