PPTP Clients Access to SpeedFusion Sites

Hootan_Rastkar · January 30, 2014, 4:06pm

We’d like a feature to enable PPTP users connecting to a Peplink device to be able to have access to the remote sites connected to the same Peplink by enabling a specific rule in Firewall/Outbound policies.

Keith · January 31, 2014, 9:46pm

We are a bit confused. Right now PPTP users are treated as coming from the LAN, they should have access to remote sites connected to a Peplink just fine.

Hootan_Rastkar · February 1, 2014, 3:15am

Dear Keith ,

in my Peplink PPTP users don’t have access to remote sites. Is there any extra configurations for that ?

Thanks - Hootan

Tim_S · February 1, 2014, 10:06am

Hi Hootan, Can you ping those remote devices?

Hootan_Rastkar · February 1, 2014, 4:26pm

No I can’t

Tim_S · February 3, 2014, 5:11am

Do you have a default inbound firewall rule set to deny all? If so, you will need to add a firewall rule to allow access from the local subnet.

Hootan_Rastkar · February 3, 2014, 4:37pm

Dear Tim ,

No there is no deny rule.

Thanks - Hootan

Tim_S · February 4, 2014, 1:59am

Hi Hootan,

Please start a support ticket via our site so we can dig further.

Thanks - Tim

Hootan_Rastkar · February 4, 2014, 2:56am

Dear Tim ,

I found what was going wrong.

I should check the “Use default Gateway on Remote Network” check box in the properties for VPN connection.

After enabling it , problem solved.

Thanks and Regards,

Hootan

Tim_S · February 4, 2014, 3:03am

Awesome, thanks for the update Hootan. I believe that option is enabled by default.

Regards,
Tim