I’ve got a Peplink B One 5G router on the way. Id line to be able to run it off a power bank/battery. Im looking at this one:
https://a.co/d/haVMEQM
Can someone confirm my thinking? It looks like it can power the 12v 3A needed by the router using a male USB-C to female Molex 4-pin adapter? And do you know where I can get such an animal, preferably without making it myself? What might be a better option?
Hi,
thats easy, order it at your Peplink Partner 
BR
Dennis
I’ve been googling for an hour. Lawdy. 
Your Peplink Partner is your friend. Google may not be. 
Hi @jakesterz
Have you managed to test this ?
Inside the pdf file they said that we need at least a 12V outbout power bank, but i can’t find a 12/15V capable power bank that looks like the one in the pdf file.
They are more bigger.
BR
Rudy
I went MacGyver and used a PowerConverter to use any portable battery 1. USB C to Barrel, and the 2. Barrel to 4 Pin Molex to obtain the same results: The BR1 Pro takes 9V min, just like the Cradlepoint, however, DIGI is power hungry and takes 19v Amazon.com: FARSENSE USB C to DC Adapter,Barrel PD Trigger Cable(3.3ft) with 10 Connector Tips,USB to DC Power Cable can Switch Voltage by Pressing The Key,Support LED Display Voltage : Electronics
One way to do this is to get a USB-C PD capable power bank and then get a USB-C to DC power cable of the appropriate voltage (12 or 15V). These are cables that are setup to always request a fixed voltage from the PD source. Cables are ~$10-15.
V-Mount Battery with adapter to PD and Peplink USBC to 4 pin
Battery:
https://a.co/d/eHn3vaj
Adapter: https://www.bhphotovideo.com/c/product/1750225
Peplink ACW-791
I use a D-Tap to 4 pin cable (We build our own calbes) to use a V-Mount Battery, then you have 12-16V. With many USBs you only have 5V
