Port Forwarding Issue: WiFi WAN to VLAN with Incorrect Source IP

[MarceloBarros]

Hi…

Try this link.

How to Configure One-to-One NAT Mappings

NAT Mappings also known as 1-to-1 NAT allows internal hosts, such as web server and mail server etc., behind Peplink Balance to communicate to the Internet via all protocols. With 1-to-1 NAT, you can: For inbound traffic, forwarding all TCP/UDP/IP protocols to the host behind the Peplink units. For outbound traffic, you can specify a Public IP address which you defined as "Additional Public IP" via WAN Settings as the source IP address. The followings are two scenarios of configuring 1-to-1…