Hello Michael @Michael234,
Not sure if you’ve checked InControl2, at https://planet.ic.peplink.com/o/ABC123/n/99/client_list (change planet & organisation details), you can see the band in use.
These four screen captures are from real client systems taken today that are monitored and managed from InControl2.
These devices are connecting to a mixture of:
- Pepwave APO-RUG
- Pepwave APO-ENT
- Pepwave MAX-TST-DUO
- Peplink PBL-ONE
Directly in a Balance ONE router, we can see the connection types of “ac, na, ng” which will let you know how the client is connecting to the AP controller.
Here is the client list page from a Pepwave APO-RUG, again under the is shows “ac, b, g, a” depending on the connection type.
So on InControl2, you can see the information you are seeking already under the client lists.
On the Peplink routers, you go to the “AP” controller and see there under the “Wireless Client” menu the connection type.
On the Pepwave WAPs, you can go to the “Status” and see there under the "Client List: menu the connection types.
Note: all of these devices are running the latest version of Firmware available at the time. The SOHO is a reduced capabilities product compared to the above examples, though this should help point you to the information you are seeking.
If you can, we recommend using InControl2 to monitor and manage your devices.
Happy to Help,
Marcus 