Dear Guys ,

Please someone explain for me how PepVPN support dynamic IP environment and how it works … Does it mean that we can have dynamic IP at both sides or still one side needs static IP ?

Thanks - Hootan

Only the WAN set to priority 1 will be used for sending the data through the SpeedFusion VPN. The priority 2 WAN will build a tunnel and only be used when WAN 1 goes down.

You will still need a static ip on one side.


The remote IP address field in configuration also accepts DNS names. So you could also use dynamic DNS on any side to receive VPN connections.


If the modem does a NAT on the dynamic DNS side, it must be set up to forward ports to the Balance.

Noted Guys…

Thanks so much.

Best regards.