[Social media post on 2020-06-15]
In May, Peplink’s Maritime Specialist will go through the Best Practice Guide and Examination skill through a series of webinars. Join our Maritime Peplink Certified Engineer (mPCE) course to become an expert about the Peplink Solution in Maritime vertical!
Learn more: Maritime Peplink Certified Engineer (mPCE) Campaign 2020
[Social media post on 2020-06-16]
What if your broadcast got disconnected while it’s on-air? It’s awesome to see how German radio broadcaster RTL Radio in Germany uses SpeedFusion cellular bonding to enable RTL Radio to stream outdoor concert smoothly. We all love the undisrupted transmission, don’t we?
Learn more: Unbreakable Outdoor Broadcasting: RTL Radio Center Berlin GmbH
[Social media post on 2020-06-17]
“Peplink SD-WAN is a perfect solution when you have Multiple DSL Bonding and with LTE sim combining all together to get good throughput. The other beauty of the product is a cloud management portal to monitor all the operations and fine-tune each node to get better results.”
[Social media post on 2020-06-18]
Peplink has three routers certified for use in UK’s Emergency Services Network (ESN): the HD2 MBX, the HD4 MBX and the BR1 ESN. These routers have been approved for use in the country’s fleet of first responders and emergency service vehicles.
Learn more:
http://download.peplink.com/resources/pepwave_esn_datasheet.pdf
[Social media post on 2020-06-19]
“Improved performance and availability while reducing the cost of connectivity at the same time, just the right solution for institutions in our country where connectivity cost is very high while speed is very slow.”
[Social media post on 2020-06-22]
In May, Peplink’s Maritime Specialist will go through the Best Practice Guide and Examination skill through a series of webinars. Join our Maritime Peplink Certified Engineer (mPCE) course to become an expert about the Peplink Solution in Maritime vertical!
Learn more: Maritime Peplink Certified Engineer (mPCE) Campaign 2020
[Social media post on 2020-06-23]
[Social media post on 2020-06-24]
#Webinar Introducing Peplink Firmware 8.1.0 will begin in 1 day
Join our webinar on Thursday, June 25th to learn what’s new and cool in Peplink firmware 8.1.0. This webinar is FREE and can help new Peplink partners to quickly get up to speed with our new software features.
You’ll learn what’s cool in Peplink firmware 8.1.0:
● Drop-In Mode Supported for All Routers
● Unbreakable Time Server
● Bandwidth Bonding Included for MediaFast 500 and 700
● and more…
Register now:
https://us02web.zoom.us/webinar/register/WN_hDkB5-qdTJyL2-DXptmzpA
[Social media post on 2020-06-25]
Firmware 8.1 Feature Deep Dive
Peplink devices can now serve as a local NTP server to provide connected clients the accurate time. Peplink can get the time from either an external NTP server or via GPS ensuring there will always be a way for Peplink to deliver accurate time even without Internet connectivity or GPS.
This allows you to streamline your network and save costs.
[Social media post on 2020-06-26]
We are proud to introduce Firmware 8.1. In addition to enabling SpeedFusion Cloud, this Firmware strengthens Wi-Fi security, helps you monitor your network, while adding highly requested features.
[Social media post on 2020-06-29]
Instantly Access to Your Device on Chrome
We are launching a Chrome extension to simplify device management. Just enter the serial number of your device, and its InControl screen will open in a new browser tab. No more navigating to the device management page and performing a serial number search!
[Social media post on 2020-06-30]
FusionHub Is Now Available on the AWS Marketplace!
Now you can conveniently set up FusionHub directly from the AWS Marketplace without the need to source and share the Amazon Machine Images (AMI).
Learn How
https://forum.peplink.com/t/deploying-peplink-fusionhub-at-aws-marketplace/28571
[Social media post on 2020-07-02]
See walkthrough video
Peplink’s subscription service, SpeedFusion Cloud, allows you to take advantage of all the benefits of SpeedFusion Bandwidth Bonding with just a single Peplink router.
A single router forms a SpeedFusion VPN connection to the SpeedFusion Clouds hosted by us supercharging your network and saving equipment cost.
[Social media post on 2020-07-03]
We have unbreakable live-streaming for a Netflix movie! The MAX HD2 and Transit multi-cellular routers streamed video back to a datacenter equipped with FusionHub. Thanks to SpeedFusion Bandwidth Bonding, the video stream continued seamlessly even if a cellular link lost connectivity.
Behind the troops, choppers, and all the cool gear, you can see the joy and passion that the CYN Communications brought into the project. This deployment is raw, resourceful, and shows our stuff in action. The prize for this round is our newest AP One AX, Congratulations!
[Social media post on 2020-07-06]
[Social media post on 2020-07-07]
Stay on top of SpeedFusion usage with realtime SpeedFusion graphs displaying throughput, latency, as well as important events within the tunnel. In addition, each WAN-to-WAN connection has its own graph for quick and easy troubleshooting.
See walkthrough video - https://youtu.be/r3dK2qxB50g
#peplink #unbreakable connectivity #anytime #anywhere
8.1 Beta: www.peplink.com/open-beta-program/
[Social media post on 2020-07-08]
[Social media post on 2020-07-09]
Join our FREE webinar on Wednesday, July 22nd to learn 5 things you didn’t know Peplink and IC2 can do for Public Safety.
You’ll learn:
● Peplink product portfolio for Public Safety
● The top 5 useful features for Public Safety (with live demo)
[Webinar] Peplink for Public Safety (US / EMEA region)
● Wednesday, July 22, 2020
● 11 AM Central Time (US and Canada) / 5 PM (London)
We will record the US session. Register to receive the recording and the slides on around July 24, 2020
[Social media post on 2020-07-10]
Our Friends at GetWireless are letting everyone know about Verizon’s router activation promo! A perfect way to get up and running quickly while keeping an eye on the bottom line.
#peplink #unbreakable connectivity #anytime #anywhere
[Social media post on 2020-07-13]
