Peplink Balance & Pepwave MAX Firmware 5.4.9 RC [Firmware 5.4.9 GA Released on 2013-May-31]


#1

We would like to announce 5.4.9 RC, please try and post the comment in Beta Feedback forum](https://forum.peplink.com/forums/39-Feedback)

Download link:

Balance 20/30
http://download.peplink.com/firmware/plb30/fw-b20_30-5.4.9-build1732.bin

Balance 210/310 Hardware Revision 1
http://download.peplink.com/firmware/plb310/fw-b210_310_hw1-5.4.9-build1989.bin

Balance 210/310 Hardware Revision 2/3
http://download.peplink.com/firmware/plb310/fw-b210_310_hw2_hw3-5.4.9-build1564.bin

Balance 380 or above
http://download.peplink.com/firmware/plb700/fw-b380_390_580_700_710_1350-5.4.9-build2573.bin

MAX 700/HD2
http://download.peplink.com/firmware/m700/fw-m700_hd2-5.4.9-build2101.bin

Changes to Firmware 5.4.9 since 5.4.7

Added:

  • Lowest latency mode for SpeedFusion
  • Manual mapping for SpeedFusion Support

Improvement:

  • Overall System stability
  • SpeedFusion stability and performance
  • Local DNS Proxy stability and performance
  • Client Bandwidth Usage display issue

**IMPORTANT NOTE **

  • Please upgrade to firmware 5.3.12 before upgrading to firmware 5.4 (B20/30 only)
  • SpeedFusion Site-to-Site VPN 5.4 is also backward compatible with firmware 5.2/5.3
  • For the best performance, we recommend to use latest 5.4 firmware in all VPN peers
  • Firmware 5.4 now utilizes TCP port 32015 and UDP port 4500. (Firmware 5.2/5.3 used TCP port 32015 and UDP port 32015)

#2

Firmware 5.4.9 turned to GA release. Please go to the following forum post to check the details.

https://forum.peplink.com/threads/1960-Balance-MAX-Firmware-5-4-9-Available-Now!