Peplink as OBM on the WAN side

Product Discussion Peplink Balance
1

Hi Team,
I wish to install a Peplink on the WAN side between the internet and a UBNT Dream Machine.
The Peplink will be installed in front of the Dream Machine to provide remote management of the Starlink internet service (stats/reboot/etc).
The Peplink will give internet access to the Dream Machine via DHCP out LAN 1.
Is it possible to configure the Peplink LAN2 as a DHCP client or a with a static IP so I can plug into the LAN side so I can access the LAN clients via in touch?

Any help will be appreicaited.

3

Screenshot 2024-03-05 160555.png
Screenshot 2024-03-05 160555.png662×571 50.9 KB

1 Like
4

Yes I think that should work fine. Alternatively you can connect the wifi WAN of the BR1 Pro 5G to your LAN.

5

I got this working.
I tagged a VLAN (V10) towards the Dream machine with a /30 on LAN Port 1.
On LAN port 2 I placed a 192.168.1.100/24 address and ran it untagged into the switch, bypassing the Dream Machine.
I now InTouch control of all LAN devices from IC2.