Peplink and asa

Product Discussion Peplink Balance
1

Hi

asa-pep
asa-pep777×403 12.7 KB

I have the above topology. load balancer is peplink

I want to do a static nat for 192.168.1.10 to 2.2.2.10 so that the traffic comes through the second ISP.

What needs to be done on the ASA side and also from peplink side to achieve the above a

Thanks

2

Do you have NAT between the outside of the ASA and the LAN side of the Peplink, or is traffic being routed?

3

Hi,
Between the ISP1 router and Loadbalancer , it is directly connected .

For outbound traffic through ISP2 , doing NAT with the 2.2.2.1

For inbound Traffic 192.168.1.10 on ASA I have a NAting rule to translate 1.1.1.4 and on peplink 1.1.1.4 nat to 2.2.2.10
So the inbound traffic to 2.2.2.10 will be translated to 1.1.1.4 by PEPLINK and 1.1.1.4 and 1.1.1.4
Translated to 192.168.1.10 on ASA
to avoid NAT 2.2.2.10 to 1.1.1.4 on PEPLINK what need to be done
Thanks