Out if warranty repair peplink 580 link

[Jonathan_Pitts]

Connect to the console or try my method posted here:

Bricked Balance 580 config deletion

I have a unorthodox method to try and get it to boot. Open the top cover with the unit unplugged. Put a small screw driver , pin, screw in the fan slot so it doesn’t spin. power unit on, ensure the fan does not spin. Unit should throw a new error , beep twice , and then boot. You can also try to do this from the back fan slot without opening it. It needs to stop the fan spinning for this to work. [image] Note: this is not recommended to continue to use this device for production. You lik…