No data stream after TLS handshake


We have just installed a balance HA-pair but having trouble to get out pepVPN up and running(manual config).

I’ve taken a tcpdump on both sides and you can see a normal tls-session but then it ends with a
encrypted alert content type 21 and after that a tcp RST, ACK.

So we have our ports open in the firewall, we can see the session through port 32015, but after the handshake it gets terminated.

Peplink dashboard just tells me that pepVPN is Starting…

Looking for clues to solve this problem.

The problem in this case was fw mismatch.
The new balance router was running 7.x.x and the max transit 8.x.x

After the latest fw was uploaded to the balance router everything worked fine

1 Like