Hello @revenknight99 ,@Joey_van_der_Gaag & our previous postings on this helpful, have a read through these post here.
Hello @zegor_mjol ,
With both the information from @Joey_van_der_Gaag and myself, see if you can work through the antenna selection guide from Telco Antennas at https://www.telcoantennas.com.au/site/what-antenna-do-i-need , although it is primarily written for Australia, the fundamentals are the same for anywhere in the world.
You will need to run at least two additional antenna cables (Minimum LMR400 or LCU400 cable).
[image]
Use with s suitable high gain antenna setup using antennas like the…
Hope this adds to the good advise already from @Joey_van_der_Gaag
Here is the same antennas on the manufactures mount.
In Australia you need to be installing 45Deg off the horizontal with the two antennas 90Deg opposed for best results as shown in this photo, in Australia if you mount so the fins are flat on the Horizontal, then you will get almost no performance out of the antenna (and in most parts of the world this would be the same too).
[image]
You can source this from many antenna sup…
Read through the comments from both @Joey_van_der_Gaag & myself and see how you go.
1 Like
