Max Transit Duo Router with Starlink 12-48V POE Modification

[wz-shopping]

But I remember you had to use a switch: Starlink connect to the switch and the switch connect to PepWave router WAN port, right?

MAX BR1 Pro 5G WAN to Starlink directly without Starlink Router

@mystery I don’t have 24V but 12V, also there is no Victron 12V - 56V DC-DC converter but there is nothing wrong with the hardware nor the cabling itself. Also you only need the higher Watt output for the heating of the dish and that is not required over here, also the inverter I have is 48,3V 3A and that is enough. And you do have to Swap the cable order on the outgoing data side with this passive POE like the one I use if you use yaosheng you overcome the need of swapping as this is done ins…

Or can you connect Starlink directly to PepWave router WAN port now and have no performance issues?

Thanks!