MAX BR1 Mini HW3 Cellular firmware issues and questions

[1wheeler1]

Hi,
We’ve been troubleshooting some cellular disconnect issues and I think this has been asked before but wondering why the latest BR1 Mini with the Telit LE910C4-NF modem shows a current firmware of 660010 with latest available appearing to be older as version 660006? If you go ahead and try to update you get the “Failed, cannot find firmware image” message below.

I’ve also noticed the Verizon firmware in HW3 units with the Sierra EM7411 modem seems to be quite outdated. Does this mean that the Pepwave firmware updates don’t contain a cellular firmware update and those will always have to be done manually over the cellular connection?
Thanks

[WeiMing]

@1wheeler1

I’ve also noticed the Verizon firmware in HW3 units with the Sierra EM7411 modem seems to be quite outdated. Does this mean that the Pepwave firmware updates don’t contain a cellular firmware update and those will always have to be done manually over the cellular connection?

Usually, the cellular firmware is independent of the router firmware as the cellular module firmware size cannot be fitted into the router firmware.

[Avery.2PiFi]

I am also getting the message “Failed, cannot find firmware image” when trying to update the cellular module on a Max BR1 Mini 5G. Is there a workaround to get this Quectel card updated?

[WeiMing]

@Avery.2PiFi responded in another thread (MAX BR1 Mini 5G Cellular Module Firmware Update error - #3 by WeiMing).