Hi, recently one of our clients ask us if we could setup LDAP Authentication for remote access (Open Vpn), he sent us all the information needed, but when I try a to login with a user I get user/password error. Maybe I’m missing something on the Peplink Setup. Does any one has a clue?

So far:
Vlan with dchp server created (I can login with local user accounts autentication without any issue)

LDAP Server address: host or ip
Port: 389 Default
Bind DN: Info is correct, I can connect using a LADP Browser
Bind Password: Correct too!
Base DN: CN=domain,CN=com
Base Filter: (&(objectCategory=CN=Person,CN=Schema,CN=Configuration,DC=domain,DC=com)(memberOf=CN=USER_Group,CN=Users,DC=domain,DC=com)) ← on ladp browser I get the 6 users with the privileges.

When credential window prompt I use : sAMAccountName / Password

Failed every time! Can’t find what’s wrong!

1 Like

We tested OpenVPN with LDAP is working fine. We tested with 8.0.2. Please find the screenshot below.

We set up the LDAP server according to this link - How to Install OpenLDAP on Ubuntu Server 18.04 - Linux.com. Please try with Untagged LAN and using latest firmware version. Please check the LDAP server if you still face the problem. Alternatively, you may setup another LDAP server to rule out the problem.

Hope this helps.

1 Like