Ipsec tunnel with Palo alto

[sureshkc]

Can pepwave hd4 max form ipsec tunnel with palo alto ?

[Jason]

Hi Sureshkc:

Thanks for the question, Peplink absolutely supports IPsec tunnel creation to non-Peplink devices (all things being equal).

[sureshkc]

Screenshot of pepwave balance 380 showing “Peplink IPsec only supports network-to-network connection with Cisco, Juniper or Peplink device”.

I was successful to setup IPsec with Cisco Router but i am struggling to setup one with Palo-Alto.

Please guide.
Thanks

[MartinLangmaid]

Perhaps this will help:

IPSEC tunnel with Palo Alto firewall

I thought I’d share this experience I have just had with a tunnel from an HD4 to a Palo Alto firewall device. On matching up settings I found the tunnel established no issue and no errors but traffic would not pass through the tunnel, various things were tried (usual NAT-T enable etc) but to no avail. After some time and troubleshooting I found that changing the phase1 and 2 settings down resolved the issue despite the fact the tunnel came up with no errors (on both sides) Originally I had th…