Invalid Firmware Image while upgrading 6.2.1 build 2014 to 7.02 for a Balance 310. Please Help

[motorolie]

Invalid Firmware Image while upgrading 6.2.1 build 2014 to 7.02 for a Balance 310. Please Help

[motorolie]

[Tim_S]

What HW version is your 310? You can check on the Status page of the router.

[motorolie]

My hardware version is 4
I see …only HW 2-3 thAT SUXS
How can i add 4 WAN to my device … i like to add my 4th ADSL to the USB mobile port i am getting a dhcp address from my ISP.
I see that other peplink has the option to change your settings

[motorolie]

Can I Use Ethernet Adapters on the USB WAN?

[Update: Added hidden feature guide] By default, the USB port is “USB Modem” mode. If you need to use it to connect to USB Ethernet Adapter, you need to change it to “USB Ethernet” mode, by enabling the hidden feature. Once this feature enabled, the interface will behave as normal Ethernet WAN. Enable the hidden feature - USB Ethernet mode [image] USB Ethernet mode enabled - same as Ethernet WAN [image] Again, as mentioned, this feature is currently experimental and this list may b…

i like to enable the hidden feature
Why don’t i have this option???

[motorolie]

How do i enable USB ethernet mode?

[Tim_S]

Latest firmware can be downloaded from our site

The USB port on the 310 only works with cellular modems not Ethernet adapters

Can I Use Ethernet Adapters on the USB WAN?

With an USB Ethernet Adapter, the USB port on the following models can be made to accept an Ethernet connection: Balance: 305, 380, 580, 710, 1350, 2500 MAX: All products equipped with a USB port will support this feature. Surf: SOHO. We have tested this feature with the following USB Ethernet adapters: Apple USB Ethernet Adapter. ASUS USB 2.0 to Ethernet Adapter. Plugable® USB 2.0 to 10/100/1000 Gigabit Ethernet LAN Wired Network Adapter. Linksys USB 3.0 Ethernet Adapter (USB3GIG) TP…