Hello @KPS,
What is preventing you from running three separate “Star” SpeedFusion groups?
We recently posted about using groups for different security levels, you can also apply this concept with SpeedFusion too.
Lets take your “test-group” (and I’m going to work on the basis you have everything within InControl2):
- Create within your organsiation your “test-group”, add one device and ensure it is all setup how you need, then add the remaining four devices
- Create another “HQ” group for your 710s, again adding one first and getting all of your setting good before adding the second unit
- At the Organisational Level, enable SpeedFusion and then create your first SpeedFusion Star for the “test-group”
- Check everything is working as required then repeat the process for the other two setups across the 100 branches.
This is just an overview and your would need to schedule a network outage of your SpeedFusions links to set this up as when you move the SpeedFusion Management from the Balance 710s to InControl2 it is possible InControl2 may overwrite the existing SpeedFusion settings.
We highly recommend working closely with your experienced & trained local Authorised Peplink Partner for specialised assistance in getting this working the way you need, it certainly can be done.
Your local Certified Peplink Partner can help you with a detailed plan to get this done and will be able to bring there expertise into make it work with you. There is also lots of the Peplink team and Peplink Partners here in the forum that are able to guide you also.
Happy to Help,
Marcus 