Hello @plohmeier ,
Credit for this article goes to @mldowling of Rising Connection , Australia
Peplink have hidden several of the menus until you add in equipment that is capable of the menu’s features. Pre-configuring of these can help tremendously with doing large project roll outs. The Hiding of the menus has been done to help simplify the on boarding process for new people and their devices.
For those that need to do more advanced pre-deployment work, all of the features are available, though you need to d…
https://forum.peplink.com/t/incontrol-2-initial-setup-guide/8483?u=mldowling
Introduction
This article describes step-by-step how to configure Captive Portal in InControl2.
With captive portals you can easily offer internet to your guests and easily control connection time and speed, data usage limits, and more.
By creating captive portals in InControl2 , you can apply the same configuration to all, or a selection of your Peplink Access Points in just a few clicks.
Sign in to InControl2
Select your Wi-Fi AP settings and click on the “Add new SSID” button
[CPiIC2]
A sc…
You can find more guides at Peplink | Pepwave - Forum
I don’t see any reason why it would not work with the Peplink Balance 310x, if you follow the guides and have the latest firmware, it should be working fine.
Happy to Help,
