Inbound Loadbalancing


#1

Hi All,

We would like to know if there are any features along with inbound loadbalancing which could do some level of SLB. We need inbound loadbalancing over multiples WAN with multiple servers. Can that be possible?

Regards,
Rupesh


#2

Yes this is possible. You can use an IP range with inbound NAT mappings or you can use inbound service rules and set a weight ratio for your servers. The authoritative DNS feature will determine which WAN link to use.


#3

Hi Ron,

Is there anyway to enable health check for those servers like we can do on ADC?


#4

Hi,

Balance router is not ADC. We only do heath check for internet link but not server.