I need configure Drop-in + Vlan

[TK_Liew]

Please refer to the knowledgebase below. You may contact your purchasing point if you need further help.

Deploying Peplink | Pepwave products in Drop-in mode

Drop-in Mode allows Peplink | Pepwave products to be deployed in a network without configuration changes on existing network infrastructure. Example: Pre-Installation In the following network diagram, ISP A provides a 24-bit network 210.10.10.2 / 255.255.255.0, 210.10.10.1 is the default gateway. The Firewall is performing NAT (Network Address Translation) for Local Area Network 192.168.1.0/2 to access the Internet. Firewall settings: NAT Enabled External Interface IP: 210.10.10.2/24 Defau…

Thanks.