I have used a lot of virtualization software over the years, and we are currently using proxmox.
A lot of vm articles are written for vmware and hyper-v , but it’s often hard to find what you need to adapt for proxmox.
We have been provisioning a lot more fusionhub’s as of recent, so I wanted to put together a how to article for installation of proxmox.
-instructions based on Proxmox 6.3-6
-login to proxmox shell
-download fusionhub
wget https://download.peplink.com/firmware/fusionhub/fusionhub-8.0.1-build1644.zip
-unzip fusionhub
unzip fusionhub-8.0.1-build1644.zip
cd Fusionhub/OVF
-untar ova
tar xvf FusionHub.ova
-import ovf to your location
-Change 3001, to whatever id number you want.
-Change CEPHpool your disklocation
qm importovf 3001 FusionHub.ovf CEPHpool
-Go to your proxmox node
-highlight the newly imported vm and click hardware
-highlight hard disk and click Detach
-confirm
-Highlight unused Disk 0, and click edit
-Change Bus/Device to Scsi and click add
-Click Scsi controller and change type to Virtio SCSI
-Click Add network card change model to virtio
-Click Memory change to 4096
-start vm
-open console to watch it boot up, follow instructions on screen to change to static ip if needed.