How to enable static route to PPTP and/or L2TP with IPSEC users

Product Discussion Peplink Balance
1

Hi!

With the recent firmware, 6.3.2 build 3525, inbound firewall rules is already available and can accomplished that PPTP and/or L2TP with IPSEC users can access the LAN side of PepLink. What differs in my scenario is, I wish to have the PPTP and L2TP with IPsec users to be routed to the static route I set up in the LAN. So, this will not only allow those users to access the LAN side of the PepLink but can also allow the users access the network behind a router connected to the LAN side of the PepLink. Is this possible? And how?

Using: Peplink 380 HWv5 and firmware v6.3.2 build 3525.

Many thanks!

2

A LAN static route in the Balance is all that is needed assuming your router is not doing a NAT.

3

Hi,

Similar forum thread opened. Please refer to the forum thread below:

Thank You