Help with creating static route



I am trying to use the Peplink Balance 20 to route traffic between two subnets on the local network. We have a simple setup, Gateway --> Peplink Balance 20 --> Netgear 48-port switch —> LAN 192.168.0.x.

I want to create a VLAN on the 192.168.1.x subnet and route traffic back and forth. I have established VLAN1 on Port 4 of the Balance 20 using 192.168.1.x.

If I connect a laptop to Port 4 on the Peplink and assign it a static IP of it cannot ping the gateway As of now there is no traffic flow. How do I proceed from here?


Hi outerheaven11, do you set lan port 4 in access mode on vlan 1 ?
By default all port are set in trunk on untagged vlan .


That was the problem. Everything works great now, thanks for your help!