Fusion Hub Snapshot to Vultr Upload Error

General
1

Ive tried everything to upload the fusion hub snapshot on Vultr. I keep getting the same error. I followed Martin’s video. https://youtu.be/ZxZBWloVizM?si=B4jfxz73GC5sBqYM

Heres the error i keeping getting

“Expected a raw disk image, but found: HTML document text\012- HTML document text\012- HTML document text\012- HTML document text\012- HTML document text\012- exported SGML document, ASCII text, with very long lines”

Yett the file ext says .raw but it only sees as a html. heres the link url and raw file to download. Firmware & Documentation- Peplink

Anyone having the same issue? TIA

2

I had the same issue a month ago. It wasn’t important so I gave up trying to figure out why.

1 Like
3

Hi @markhepi

There are some suggestions on this post, from others that had the same issue:-

I hope this helps,
Steve

4

Please refer to Section 4.10 of the FusionHub User Manual for instructions on setting up FusionHub on Vultr.

It is important to copy the link for the “RAW (UEFI)” from this page.

You may also find this forum thread helpful:

2 Likes
5

Thanks Steve appreciate the help