Forwarding Static Wan address from Hub to Pepvpn Client

[Wouter]

Hi Team,

How would we implement the following sollution using speedfusion bonding, what would be the best way to achieve this. Would like to get some insight on this.

See image below for description.

[TK_Liew]

Do you think this helps?

Fusionhub NAT-Mode DHCP Reservation

@ue-it, @FrontierComputerCorp, if you would like to assign a Public IP (from FusionHub) to the remote peer as shown in the example below, you can refer to slides 14 - 20 on the configuration guide. [image] Or, if you prefer to just do the Port Forwarding, then this post should help.