I have a customer with a WAN IP address /30 and a block of /29 Public IP address to be used on LAN. I’ll like to know what configuration is suitable for forwarding LAN /29 IP address to the public. Not sure of Drop-In-Mode or Outbound Policy can do the magic.
With a /30 for routing the /29 public IP addresses, I would recommend IP forwarding on the WAN and outbound policy can do the magic. Under: Network> WAN> Connection Settings - click on the “?” next to Routing Mode to enable IP Forwarding.
1 Like
Hi Ron,
Thank you for your response. I’ll try the IP Forwarding and get back.
Regards
any updates on this? i realize its old but i have a customer with same setup from AT&T, and I need to route public IPs to 5 suites using the balance 310 fiber 5g router that was recommended for this. I cannot find a way to do so and this example from draytek explains it well