Hi everyone,
I’m working on configuring a mesh-style VPN network using SpeedFusion to connect a remote device (e.g., via satellite communication) to multiple endpoints. The goal is for the remote device to broadcast data to predefined IP addresses (for example, 10.1.0.27 or similar), but I need the VPN to allow flexible linking to any number of endpoints—could be 1, 3, or even 10+. Importantly, even if an endpoint isn’t in the device’s broadcast list, it should still be able to reach the remote device, log in, and add itself to the list.
Currently, the remote device and my FusionHub VM show as connected on the topology map (both linked to the hub), but they won’t communicate with each other. I’ve set up the basic VPN profiles, but as a non-expert in networking, I’m stuck troubleshooting this. Any advice on routing, static routes, or common pitfalls would be great. Thanks!